Why compare here
Compare protocol support, data rate, channel count, protection, and physical-layer requirements.
Interface & Logic
Interface Transceivers
interface transceivers
2533
catalog products
Category overview
Transceivers and interface ICs for reliable communication between systems, buses, and physical layers.
Common applications
Industrial networks, embedded systems, automation, instrumentation, and communications.
Selection guide
Define protocol, speed, cable length, node count, termination, isolation, protection, and supply.
Filter this category
UTC
UT3232G-SOP16T-R-SOP16
UT3232G SOP16T/R SOP16 - UTC
Honeywell
WDRR1A05A0A
WDRR1A05A0A - Honeywell Interface IC, TO
WEIKAI
WK2114-ISPG-SOIC-20-300MIL
WK2114-ISPG - WEIKAI, SOIC-20-300MIL
WEIKAI
WK2212-IQNG-QFN-32
WK2212-IQNG - WEIKAI, QFN-32
XINLUDA
XD232-DIP-16
XD232 - XINLUDA, DIP-16
XINLUDA
XD8574AP-DIP-16
XD8574AP - XINLUDA, DIP-16
XINLUDA
XL1000-SOP-28-300MIL
XL1000 - XINLUDA, SOP-28-300MIL
XINLUDA
XL1040-SOIC-8
XL1040 - XINLUDA, SOIC-8
XINLUDA
XL1050-SOIC-8
XL1050 - XINLUDA, SOIC-8
XLSEMI
XL1192S-SOP-16
XL1192S - XLSEMI Interface IC, SOP-16
XINLUDA
XL2515-SOP-18-300MIL
XL2515 - XINLUDA, SOP-18-300MIL
XINLUDA
XL2515-TSS-TSSOP-20
XL2515-TSS - XINLUDA, TSSOP-20
XINLUDA
XL2551-SOP-8
XL2551 - XINLUDA, SOP-8
XINLUDA
XL3232-SOP-16
XL3232 - XINLUDA, SOP-16
XINLUDA
XL3232-TS-TSSOP-16
XL3232-TS - XINLUDA, TSSOP-16
XINLUDA
XL485-SS-MSOP-8
XL485-SS - XINLUDA Interface IC, MSOP-8
XINLUDA
XL485CS-SOP-8
XL485CS - XINLUDA Interface IC, SOP-8
XINLUDA
XL74LS07-SOIC-14
XL74LS07 - XINLUDA, SOIC-14
XINLUDA
XL82C251-SOP-8
XL82C251 - XINLUDA, SOP-8
XINLUDA
XL8574AT-SOP-16
XL8574AT - XINLUDA, SOP-16
XINLUDA
XL8574ATS
XL8574ATS - XINLUDA
From the desk
Recent Articles
Market signals, technical notes, and practical sourcing guidance for semiconductor procurement.
W25Q32 SPI Layout: Decoupling, Trace Length, Read Failures
Why a W25Q32 works at 1 MHz and fails at 50: capacitor distance, 40 mm of SCK at 1 ns edges, and the floating /HOLD pin...
Read article
USBLC6 ESD Layout: Clamp Path, Ground Stitching, Stubs
A TVS clamps at 31 V, but 10 mm of trace adds 240 V. Placement and return path, not the part number, decide whether the IC...
Read article
2N7002 Gate Drive at 3.3 V: Threshold Spread and RDS(on)
The 2N7002 is called logic-level, but at 3.3 V it is a 20 mA switch: threshold spread eats the margin and RDS(on) roughly doubles. Here is...
Read article
TVS and ESD Diode Selection: Standoff, Clamp, Speed
How to pick a TVS or ESD diode: match standoff to the rail, clamp to the pin absolute maximum, and capacitance to the interface speed.
Read article
TP4056 Thermal Budget and Charge-Current Setting
One resistor sets the current, but input voltage and copper decide the temperature. The arithmetic, the derating table, and why 1 A often becomes 0.5 A.
Read article
How to Reduce Electronic Component Procurement Costs for EMS Production
The lowest IC unit price doesn't always mean the lowest procurement cost. Discover how EMS and PCBA buyers can evaluate landed costs, MOQ, reel packaging, BOM...
Read article
I2C Pull-Up Resistors: Fix 100 kHz and 400 kHz Errors
Calculate I2C pull-up limits, understand why 4.7 kOhm may fail at 400 kHz, and diagnose parallel module pull-ups, slow edges and voltage-domain mistakes.
Read article
LM358 Alternatives: Dual Op-Amp Cross-Reference
The dual op-amp in a million low-cost designs: why its input range is wider than its output range, and what breaks when you swap it.
Read article