Buck or LDO: Choosing a Power Topology
Two numbers decide it: voltage difference times current. Below 1 W an LDO is simpler and quieter; above it the heat has nowhere to go.
Read articleAX5U6000C3032G-DTLABBK - ADATA Memory Module
Request a Quote
AX5U6000C3032G-DTLABBK is a memory module from ADATA.
| Manufacturer | ADATA |
|---|---|
| Manufacturer Part Number | AX5U6000C3032G-DTLABBK |
| Product Type | Memory Module |
| Package | UDIMM-288 |
Request a Quote for current pricing, order quantity, packaging, date code and delivery. Supplier availability will be confirmed with your quotation.
MANUFACTURER ACCESS
Manufacturers We Source
Browse frequently requested semiconductor and electronic component manufacturers, then search the catalog or submit an RFQ for the exact part you need.
From the desk
Recent Articles
Market signals, technical notes, and practical sourcing guidance for semiconductor procurement.
TVS Selection: Standoff, Clamp, Current, Capacitance
A TVS is chosen by four numbers in a specific order. Standoff above the rail, clamp below the IC limit, enough peak current, and capacitance that...
Read article
EEPROM vs Flash: Endurance, Granularity, Write Time
Both keep data without power. Byte writes versus sector erase, 1M versus 100k cycles, and the workload that decides which one belongs in the design.
Read article
Gate Resistor and Switching Loss: One Part, Two Effects
Small Rg means fast edges and ringing; large Rg means clean edges and heat. The split diode path, starting values, and how to measure the loss.
Read article
Crystal or Oscillator: Choosing the Clock Source
A crystal needs a circuit; an oscillator is a part. Accuracy classes, startup, jitter, what changes on the board, and when a resonator is enough.
Read article
Decoupling Capacitor Selection: Bias, SRF, Distance
A 10 uF capacitor is not 10 uF at voltage, and above self-resonance it is an inductor. Dielectric, DC bias, SRF and the millimetres that matter.
Read article
HDMI and DisplayPort: A Practical Introduction
Before pixels, the source needs HPD and EDID. Lanes, AC coupling, DDC/AUX and the sideband failures behind most no-signal reports.
Read article
MOSFET Selection: VDS, RDS(on), Qg, and Thermal
Most MOSFET choices fail on the second or third number. Voltage margin, on-resistance at your real gate drive, gate charge, and the package thermal path.
Read article