Why compare here
Compare density, interface, speed, endurance, retention, voltage, and package.
Memory
Memory
memory memory
434
catalog products
Category overview
Memory ICs for volatile and non-volatile data storage across embedded and computing systems.
Common applications
Embedded storage, firmware, buffers, data logging, industrial control, and consumer devices.
Selection guide
Start with density and interface, then validate speed, endurance, retention, voltage, timing, and package.
Filter this category
Rochester Electronics
SN74ABT7819-12PH-TQFP-100
SN74ABT7819-12PH - Rochester Electronics Logic IC, TQFP-100 (14×14 mm)
Rochester Electronics
SN74ABT7819-12PN-TQFP-100
SN74ABT7819-12PN - Rochester Electronics Logic IC, TQFP-100 (14×14 mm)
Rochester Electronics
SN74ABT7819-20PH-TQFP-100
SN74ABT7819-20PH - Rochester Electronics Logic IC, TQFP-100 (14×14 mm)
Rochester Electronics
SN74ABT7819-20PN-TQFP-100
SN74ABT7819-20PN - Rochester Electronics Logic IC, TQFP-100 (14×14 mm)
Rochester Electronics
SN74ABT7819-30PN-QFP
SN74ABT7819-30PN - Rochester Electronics Logic IC, QFP
Texas Instruments
SN74ABT7819A-10PN-LQFP-80
SN74ABT7819A-10PN - Texas Instruments Logic IC, LQFP-80
Texas Instruments
SN74ABT7819A-12PN-TQFP-100
SN74ABT7819A-12PN - Texas Instruments Logic IC, TQFP-100 (14×14 mm)
Texas Instruments
SN74ABT7819A-15PN-QFP
SN74ABT7819A-15PN - Texas Instruments Logic IC, QFP
Texas Instruments
SN74ABT7819A-30PN-LQFP-80
SN74ABT7819A-30PN - Texas Instruments Logic IC, LQFP-80
Texas Instruments
SN74ABT7820-15N-PQFP80
SN74ABT7820-15N - Texas Instruments Logic IC, PQFP80
Texas Instruments
SN74ACT3622-15PQG4-BQFP-132
SN74ACT3622-15PQG4 - Texas Instruments Logic IC, BQFP-132 (24.13×24.13 mm)
Texas Instruments
SN74ACT3622-20PCB-HLQFP-120
SN74ACT3622-20PCB - Texas Instruments FPGA, HLQFP-120
Texas Instruments
SN74ACT3631-20DCB-PQFP120
SN74ACT3631-20DCB - Texas Instruments Logic IC, PQFP120
Texas Instruments
SN74ACT3631-30PCB-HLQFP-120
SN74ACT3631-30PCB - Texas Instruments Logic IC, HLQFP-120
Texas Instruments
SN74ACT3631-30PQ-BQFP-132
SN74ACT3631-30PQ - Texas Instruments Logic IC, BQFP-132
Rochester Electronics
SN74ACT3632-30PCB-QFP
SN74ACT3632-30PCB - Rochester Electronics Logic IC, QFP
Rochester Electronics
SN74ACT363230PQ-QFP
SN74ACT363230PQ - Rochester Electronics Logic IC, QFP
Texas Instruments
SN74ACT3638-15PCB-HLQFP-120
SN74ACT3638-15PCB - Texas Instruments FPGA, HLQFP-120
Rochester Electronics
SN74ACT3638-20PCB-HLQFP-120
SN74ACT3638-20PCB - Rochester Electronics Logic IC, HLQFP-120 (24×24 mm)
Rochester Electronics
SN74ACT3641-30PQ-QFP
SN74ACT3641-30PQ - Rochester Electronics Logic IC, QFP
Texas Instruments
SN74ACT7201LA20DV-SO-28
SN74ACT7201LA20DV - Texas Instruments Logic IC, SO-28
Texas Instruments
SN74ACT7201LA20NP-PDIP-28
SN74ACT7201LA20NP - Texas Instruments Logic IC, PDIP-28
Texas Instruments
SN74ACT7201LA20R2
SN74ACT7201LA20R2 - Texas Instruments Logic IC, SOIC-28
Texas Instruments
SN74ACT7201LA20RJ-PLCC-32
SN74ACT7201LA20RJ - Texas Instruments Logic IC, PLCC-32
From the desk
Recent Articles
Market signals, technical notes, and practical sourcing guidance for semiconductor procurement.
W25Q32 SPI Layout: Decoupling, Trace Length, Read Failures
Why a W25Q32 works at 1 MHz and fails at 50: capacitor distance, 40 mm of SCK at 1 ns edges, and the floating /HOLD pin...
Read article
USBLC6 ESD Layout: Clamp Path, Ground Stitching, Stubs
A TVS clamps at 31 V, but 10 mm of trace adds 240 V. Placement and return path, not the part number, decide whether the IC...
Read article
2N7002 Gate Drive at 3.3 V: Threshold Spread and RDS(on)
The 2N7002 is called logic-level, but at 3.3 V it is a 20 mA switch: threshold spread eats the margin and RDS(on) roughly doubles. Here is...
Read article
TVS and ESD Diode Selection: Standoff, Clamp, Speed
How to pick a TVS or ESD diode: match standoff to the rail, clamp to the pin absolute maximum, and capacitance to the interface speed.
Read article
TP4056 Thermal Budget and Charge-Current Setting
One resistor sets the current, but input voltage and copper decide the temperature. The arithmetic, the derating table, and why 1 A often becomes 0.5 A.
Read article
How to Reduce Electronic Component Procurement Costs for EMS Production
The lowest IC unit price doesn't always mean the lowest procurement cost. Discover how EMS and PCBA buyers can evaluate landed costs, MOQ, reel packaging, BOM...
Read article
I2C Pull-Up Resistors: Fix 100 kHz and 400 kHz Errors
Calculate I2C pull-up limits, understand why 4.7 kOhm may fail at 400 kHz, and diagnose parallel module pull-ups, slow edges and voltage-domain mistakes.
Read article
LM358 Alternatives: Dual Op-Amp Cross-Reference
The dual op-amp in a million low-cost designs: why its input range is wider than its output range, and what breaks when you swap it.
Read article