ULN2003A Relay Driver: Drop, Flyback, and Thermal Budget
Seven Darlington pairs share one thermal budget. Saturation voltage, coil voltage, the COM pin, and how many channels can run at once.
Read articleCouldn't load pickup availability
2µA 1ns 1 2V 5.5V 16mA D-Type Transparent Latch LVAT 16mA VQFN-20 surface mount, adhesive mount 4.5mm*3.5mm*800µm
| Manufacturer | Texas Instruments |
|---|---|
| Manufacturer Part Number | SN74LV373ATRGYR |
| IC Category | RF Integrated Circuits |
| Package | VQFN-20 |
| Lifecycle Status | Obsolete |
| Logic Type | D-Type Transparent Latch |
|---|---|
| Circuit | 8:8 |
| Output Type | Tri-State |
| Voltage - Supply | 4.5V ~ 5.5V |
| Independent Circuits | 1 |
| Delay Time - Propagation | 1ns |
| Current - Output High, Low | 16mA, 16mA |
| Operating Temperature | -40 degC ~ 85 degC |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Supplier Device Package | 20-VQFN (3.5x4.5) |
Inventory and pricing are updated regularly. Technical data is provided for engineering reference.
MANUFACTURER ACCESS
Browse frequently requested semiconductor and electronic component manufacturers, then search the catalog or submit an RFQ for the exact part you need.
From the desk
Market signals, technical notes, and practical sourcing guidance for semiconductor procurement.
Seven Darlington pairs share one thermal budget. Saturation voltage, coil voltage, the COM pin, and how many channels can run at once.
Read article
Why a W25Q32 works at 1 MHz and fails at 50: capacitor distance, 40 mm of SCK at 1 ns edges, and the floating /HOLD pin...
Read article
A TVS clamps at 31 V, but 10 mm of trace adds 240 V. Placement and return path, not the part number, decide whether the IC...
Read article
The 2N7002 is called logic-level, but at 3.3 V it is a 20 mA switch: threshold spread eats the margin and RDS(on) roughly doubles. Here is...
Read article
Compare CH340G and CH340C, wire V3 correctly, check UART voltage compatibility and separate USB enumeration faults from serial framing problems.
Read article
How to pick a TVS or ESD diode: match standoff to the rail, clamp to the pin absolute maximum, and capacitance to the interface speed.
Read article
Check SN74HC74 pinout, asynchronous preset and clear, guaranteed clock timing and HC/HCT input levels before qualifying a substitute or changing the footprint.
Read article
A practical MAX485 selection guide covering SOIC/DIP pinout, MCU logic levels, common-mode limits, termination, idle-bus biasing and half-duplex direction control.
Read article