PPTC Fuse Selection: Hold Current and Ambient Derating
A PPTC is selected at the hottest ambient, not at 25 C. Hold current, trip time and voltage drop are what decide the part.
Read articleManufacturer catalog
IBASE Technology components
Review searchable product records associated with IBASE Technology, then confirm the exact MPN, sourcing path and commercial conditions through quotation. Manufacturer naming is a catalog field and does not state an authorized distribution relationship.
01
Catalog visibility
Listings identify searchable components; current fulfilment and reservation are confirmed separately.
02
Stock verification
Availability, quantity, packaging and date code are checked per request.
03
Commercial confirmation
Price, MOQ, lead time and shipping terms are finalized in the quote.
Filters 0 groups
-
ASB200-908-4650ASB200-908-4650 - IBASE Technology Embedded Processor, Non-IC
IBASE Technology IBASE TECHNOLOGYNon-ICIn Stock 1 units available65,677.00 THB Final price in quote -
FWA8308-165FWA8308-165 - IBASE Technology Memory IC, BOX
IBASE Technology IBASE TECHNOLOGYBOXIn Stock 1 units available42,133.00 THB Final price in quote -
FWA8308-2SLOTFWA8308-2SLOT - IBASE Technology Memory IC, Non-IC
IBASE Technology IBASE TECHNOLOGYNon-ICIn Stock 1 units available36,719.00 THB Final price in quote -
IB919AF-8365IB919AF-8365 - IBASE Technology Embedded Processor, 3-5
IBASE Technology IBASE TECHNOLOGY3-5In Stock 1 units available29,225.00 THB Final price in quote -
IBQ800F1-X5LVEIBQ800F1-X5LVE - IBASE Technology Embedded Processor, SOT-23-DATASHEET
IBASE Technology IBASE TECHNOLOGYSOT-23-DATASHEETIn Stock 1 units available13,312.00 THB Final price in quote
Supply boundary
A searchable catalog is not an inventory promise.
Product records help identify a manufacturer part number and technical family. A listed part may be fulfilled from Chip-seek warehouse-held stock or a reviewed sourcing channel. Source, quantity, packaging, date code, MOQ, price and lead time are confirmed before an order is accepted.
From the desk
Recent Articles
Market signals, technical notes, and practical sourcing guidance for semiconductor procurement.
Buck or LDO: Choosing a Power Topology
Two numbers decide it: voltage difference times current. Below 1 W an LDO is simpler and quieter; above it the heat has nowhere to go.
Read article
TVS Selection: Standoff, Clamp, Current, Capacitance
A TVS is chosen by four numbers in a specific order. Standoff above the rail, clamp below the IC limit, enough peak current, and capacitance that...
Read article
EEPROM vs Flash: Endurance, Granularity, Write Time
Both keep data without power. Byte writes versus sector erase, 1M versus 100k cycles, and the workload that decides which one belongs in the design.
Read article
Gate Resistor and Switching Loss: One Part, Two Effects
Small Rg means fast edges and ringing; large Rg means clean edges and heat. The split diode path, starting values, and how to measure the loss.
Read article
Crystal or Oscillator: Choosing the Clock Source
A crystal needs a circuit; an oscillator is a part. Accuracy classes, startup, jitter, what changes on the board, and when a resonator is enough.
Read article
Decoupling Capacitor Selection: Bias, SRF, Distance
A 10 uF capacitor is not 10 uF at voltage, and above self-resonance it is an inductor. Dielectric, DC bias, SRF and the millimetres that matter.
Read article
HDMI and DisplayPort: A Practical Introduction
Before pixels, the source needs HPD and EDID. Lanes, AC coupling, DDC/AUX and the sideband failures behind most no-signal reports.
Read article