STM32F103RBT6 to RET6: Flash Density Migration Guide
Check pinout, flash page size and SRAM before moving a design from STM32F103RBT6 to the higher-density RCT6 or RET6 in the same LQFP64 footprint.
Read articleCouldn't load pickup availability
AS78L05RTR-G1 is a Linear Voltage Regulator (LDO) from Diodes Incorporated supplied in a SOT-89 package.
| Quantity | Unit Price (USD) |
|---|---|
| 1 | $0.0664 |
| 1000 | $0.0601 |
| Manufacturer | Diodes Incorporated |
|---|---|
| Manufacturer Part Number | AS78L05RTR-G1 |
| Category | Linear Voltage Regulator (LDO) |
| Package | SOT-89 |
| MOQ | 1 |
| Standard Pack | 1000 |
| Lifecycle Status | Active |
| Operating Voltage | 30V |
|---|---|
| Inputoutputvoltage | 5V |
| Inputoutputcurrent | 100mA |
| power (PSRR) | 62dB@(120Hz) |
| Quiescent Current (Iq) | 3mA |
| Features | -channel |
| Operating Temperature | -40°C ~ +125°C@(Tj) |
| Inputoutputchannel | 1 |
Inventory and pricing are updated regularly. Technical data is provided for engineering reference. Datasheet is sourced from the original manufacturer.
MANUFACTURER ACCESS
Browse frequently requested semiconductor and electronic component manufacturers, then search the catalog or submit an RFQ for the exact part you need.
From the desk
Market signals, technical notes, and practical sourcing guidance for semiconductor procurement.
Check pinout, flash page size and SRAM before moving a design from STM32F103RBT6 to the higher-density RCT6 or RET6 in the same LQFP64 footprint.
Read article
The schematic sets efficiency; the layout sets temperature. Hot loop, input capacitor ripple, switch-node ringing, thermal vias, and the loss budget that decides the copper.
Read article
A partial reel is cheaper per piece and riskier per failure. Tape anatomy, count tolerance, moisture history, and the five clauses that prevent most surprises.
Read article
Work out whether a 7805 can power your board: check its pins, input headroom, realistic heat budget and the changes required for a buck replacement.
Read article
A receiving routine that holds up in an audit: ISO 2859-1 sampling, AQL by part class, cheap-to-expensive test order, and records someone else can reproduce.
Read article
At 480 Mb/s a bit is 2.08 ns. 90 ohm impedance, 50 mil skew, and a continuous return path decide whether the link keeps high speed...
Read article
Choose LM317 resistor values, identify the output-connected tab, check minimum load and calculate a realistic heat budget before approving a replacement.
Read article
An oscillator that starts on the bench and fails cold has a margin problem. Load capacitor math, the negative-resistance test, and the probe that stops the...
Read article