TP4056 Thermal Budget and Charge-Current Setting
One resistor sets the current, but input voltage and copper decide the temperature. The arithmetic, the derating table, and why 1 A often becomes 0.5 A.
Read articleCouldn't load pickup availability
HIKSEMI HSEMTDY6S2D032B combines NAND flash and a controller with an eMMC 5.1 interface. The manufacturer documents a default 32 GB configuration and a customized 40 GB configuration. Confirm the required configuration in the quotation.
| Manufacturer | HIKSEMI |
|---|---|
| Part number | HSEMTDY6S2D032B |
| Device type | Automotive eMMC 5.1 |
| Default capacity | 32 GB; confirm ordering configuration |
| Custom configuration | 40 GB described by the manufacturer; confirm before ordering |
| Package | 153 FBGA; 11.5 × 13.0 × 1.2 mm maximum |
| VCC | 2.7–3.6 V |
| VCCQ | 1.7–1.95 V or 2.7–3.6 V; match host requirements |
| Operating temperature | −40 to +105 °C |
See the HIKSEMI HSEMTDY6S2D032B automotive eMMC 5.1 datasheet, version V1.0_1_3 as named in the manufacturer download listing. Verify the ball map, power sequence, host boot support, programming and assembly requirements against the full document before design approval.
This is a component listing, not confirmation of current availability or approved compatibility with a particular camera or recorder. Supply, pricing and lead time are confirmed per quotation. Send the full MPN, manufacturer, package, capacity configuration, quantity, target delivery date and any permitted alternatives through the BOM/RFQ form. Specify requested lot information, packaging and acceptance documents; review the quality and traceability process before ordering.
MANUFACTURER ACCESS
Browse frequently requested semiconductor and electronic component manufacturers, then search the catalog or submit an RFQ for the exact part you need.
From the desk
Market signals, technical notes, and practical sourcing guidance for semiconductor procurement.
One resistor sets the current, but input voltage and copper decide the temperature. The arithmetic, the derating table, and why 1 A often becomes 0.5 A.
Read article
Compare 74HC and 74HCT input thresholds, calculate noise margins, and check enable pins, power sequencing and exact ordering codes before approving a substitute.
Read article
A practical 74HC595 guide covering the 16-pin pinout, shift and latch clocks, daisy-chain byte order, HC versus HCT input levels, controlled startup and replacement checks.
Read article
The lowest IC unit price doesn't always mean the lowest procurement cost. Discover how EMS and PCBA buyers can evaluate landed costs, MOQ, reel packaging, BOM...
Read article
Calculate I2C pull-up limits, understand why 4.7 kOhm may fail at 400 kHz, and diagnose parallel module pull-ups, slow edges and voltage-domain mistakes.
Read article
The dual op-amp in a million low-cost designs: why its input range is wider than its output range, and what breaks when you swap it.
Read article
The AMS1117 is rated 1 A, but at 12 V input the thermal limit arrives near 0.19 A. Here is the arithmetic, the derating curves, and...
Read article
Week 44 brought a broad cool-off: LDO overtook 32-bit MCU as the top category, while global spot inventory kept building to 7.32 billion units.
Read article