TVS Selection: Standoff, Clamp, Current, Capacitance
A TVS is chosen by four numbers in a specific order. Standoff above the rail, clamp below the IC limit, enough peak current, and capacitance that...
Read articleCouldn't load pickup availability
TS3USB221ARSER from Texas Instruments: USB Switch IC 2 Channel 10-UQFN (2.0x1.5). Supplied in a UQFN-10(1.5x2) package.
| Quantity | Unit Price (USD) |
|---|---|
| 1 | $0.1323 |
| 3000 | $0.1228 |
| Manufacturer | Texas Instruments |
|---|---|
| Manufacturer Part Number | TS3USB221ARSER |
| Category | Integrated Circuit |
| Package | UQFN-10(1.5x2) |
| MOQ | 1 |
| Standard Pack | 3000 |
| Lifecycle Status | Active |
| Applications | USB |
|---|---|
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Switch Circuit | SPDT |
| Number of Channels | 2 |
| On-State Resistance (Max) | 6Ohm |
| Voltage - Supply, Single (V+) | 2.3V ~ 3.6V |
| -3db Bandwidth | 1.1GHz |
| Features | Bi-Directional, USB 2.0 |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
| Package / Case | 10-UFQFN |
| Supplier Device Package | 10-UQFN (2.0x1.5) |
Inventory and pricing are updated regularly. Technical data is provided for engineering reference. Datasheet is sourced from the original manufacturer.
MANUFACTURER ACCESS
Browse frequently requested semiconductor and electronic component manufacturers, then search the catalog or submit an RFQ for the exact part you need.
From the desk
Market signals, technical notes, and practical sourcing guidance for semiconductor procurement.
A TVS is chosen by four numbers in a specific order. Standoff above the rail, clamp below the IC limit, enough peak current, and capacitance that...
Read article
Both keep data without power. Byte writes versus sector erase, 1M versus 100k cycles, and the workload that decides which one belongs in the design.
Read article
Small Rg means fast edges and ringing; large Rg means clean edges and heat. The split diode path, starting values, and how to measure the loss.
Read article
A crystal needs a circuit; an oscillator is a part. Accuracy classes, startup, jitter, what changes on the board, and when a resonator is enough.
Read article
A 10 uF capacitor is not 10 uF at voltage, and above self-resonance it is an inductor. Dielectric, DC bias, SRF and the millimetres that matter.
Read article
Before pixels, the source needs HPD and EDID. Lanes, AC coupling, DDC/AUX and the sideband failures behind most no-signal reports.
Read article
Most MOSFET choices fail on the second or third number. Voltage margin, on-resistance at your real gate drive, gate charge, and the package thermal path.
Read article
A change notice is a deadline. How to classify what it touches, decide on re-qualification, size the last-time buy, and keep a record that survives the...
Read article