PPTC Fuse Selection: Hold Current and Ambient Derating
A PPTC is selected at the hottest ambient, not at 25 C. Hold current, trip time and voltage drop are what decide the part.
Read articleComponent catalog
Compare searchable component records, narrow the catalog by published technical fields, and request supplier-verified availability for your exact requirement.
MB85RS1MTPN-G-AWEWE1 - FUJITSU Memory IC, TDFN-8-EP
MB85RS128BPNF-G-JNE1 - FUJITSU Memory IC, SOP
MB85RQ4MLPF-G-BCERE1 - FUJITSU Memory IC, SOP-16-300MIL
MB85RC64TAPN-G-AMEWE1 - FUJITSU Memory IC, SON(EP)
MB85RC256VPNF-G-JNERE1 - FUJITSU Memory IC, SOIC-8
MB85R1001ANC-GE1 - FUJITSU Memory IC, SOP
MB85RS2MTYPNF-G-AWERE2 - FUJITSU Memory IC, SOIC-8
MB85RS64VYPNF-GS-BCERE1 - FUJITSU Memory IC, SOP-8
MB85R4M2TFN-G-JAE2 - FUJITSU Memory IC, TSOPII
MB85RC512TPNF-G-JNE1 - FUJITSU Memory IC, SOP
MB85RC1MTPNF-G-JNERE1 - FUJITSU Memory IC, SOP-8
MB85RC64PNF-G-JNERE1 - FUJITSU Memory IC, SOP-8
MB85RQ8MXPF-G-BCE1 - FUJITSU Memory IC, SOP-16
MB85RS512TPNF-G-JNERE1 - FUJITSU Memory IC, SOIC-8
MB85RS128BPNF-G-JNERE1 - FUJITSU Memory IC, SOP
MB85RS16PNF-G-JNE1 - FUJITSU Memory IC, SOP
MB85RS256BPNF-G-JNE1 - FUJITSU Memory IC, SOP-8
MB85RS1MTPNF-G-JNERE1 - FUJITSU Memory IC, SOP-8
MB85RS512TPNF-G-JNE1 - FUJITSU Memory IC, SOP
MB85RS64VPNF-G-JNE1 - FUJITSU Memory IC, SOP
MB85R256FPF-G-BNDE1 - FUJITSU Memory IC, SOP
MB85RC16PNF-G-JNERE1 - FUJITSU Memory IC, SOP
MB85RS64VYPNF-G-AWE2 - FUJITSU Memory IC, 8SON
MB85RC128APNF-G-AME2 - FUJITSU Memory IC, SOP-8
Supply boundary
Product records help identify a manufacturer part number and technical family. A listed part may be fulfilled from Chip-seek warehouse-held stock or a reviewed sourcing channel. Source, quantity, packaging, date code, MOQ, price and lead time are confirmed before an order is accepted.
From the desk
Market signals, technical notes, and practical sourcing guidance for semiconductor procurement.
A PPTC is selected at the hottest ambient, not at 25 C. Hold current, trip time and voltage drop are what decide the part.
Read article
Two numbers decide it: voltage difference times current. Below 1 W an LDO is simpler and quieter; above it the heat has nowhere to go.
Read article
A TVS is chosen by four numbers in a specific order. Standoff above the rail, clamp below the IC limit, enough peak current, and capacitance that...
Read article
Both keep data without power. Byte writes versus sector erase, 1M versus 100k cycles, and the workload that decides which one belongs in the design.
Read article
Small Rg means fast edges and ringing; large Rg means clean edges and heat. The split diode path, starting values, and how to measure the loss.
Read article
A crystal needs a circuit; an oscillator is a part. Accuracy classes, startup, jitter, what changes on the board, and when a resonator is enough.
Read article
A 10 uF capacitor is not 10 uF at voltage, and above self-resonance it is an inductor. Dielectric, DC bias, SRF and the millimetres that matter.
Read article
Before pixels, the source needs HPD and EDID. Lanes, AC coupling, DDC/AUX and the sideband failures behind most no-signal reports.
Read article