TP4056 Thermal Budget and Charge-Current Setting
One resistor sets the current, but input voltage and copper decide the temperature. The arithmetic, the derating table, and why 1 A often becomes 0.5 A.
Read articleManufacturer catalog
Luminary Micro components
Review searchable product records associated with Luminary Micro, then confirm the exact MPN, supplier path and commercial conditions through quotation. Manufacturer naming is a catalog field and does not state an authorized distribution relationship.
01
Catalog visibility
Listings identify searchable components; current fulfilment and reservation are confirmed separately.
02
Supplier verification
Availability, quantity, packaging and date code are checked per request.
03
Commercial confirmation
Price, MOQ, lead time and shipping terms are finalized in the quote.
Filters 0 groups
-
LM3S6633-IQC50-A2LM3S6633-IQC50-A2 - Luminary Micro Embedded Processor, LQFP
Luminary Micro OTHERLQFPIn Stock 28 units in supplier dataRM64.00 MYR Final price in quote -
SN74ACT7807-20FNSN74ACT7807-20FN - Luminary Micro Logic IC, PLCC-44-16-58X16-58
Luminary Micro OTHERPLCC-44-16-58X16-58In Stock 5 units in supplier dataRM58.00 MYR Final price in quote
Supply boundary
A searchable catalog is not an inventory promise.
Product records help identify a manufacturer part number and technical family. A listed part may be fulfilled from Chip-seek warehouse-held stock or a reviewed sourcing channel. Source, quantity, packaging, date code, MOQ, price and lead time are confirmed before an order is accepted.
From the desk
Recent Articles
Market signals, technical notes, and practical sourcing guidance for semiconductor procurement.
74HC vs 74HCT: Choosing Logic for 3.3 V to 5 V Signals
Compare 74HC and 74HCT input thresholds, calculate noise margins, and check enable pins, power sequencing and exact ordering codes before approving a substitute.
Read article
74HC595 Guide: Pinout, Cascading and Startup Control
A practical 74HC595 guide covering the 16-pin pinout, shift and latch clocks, daisy-chain byte order, HC versus HCT input levels, controlled startup and replacement checks.
Read article
How to Reduce Electronic Component Procurement Costs for EMS Production
The lowest IC unit price doesn't always mean the lowest procurement cost. Discover how EMS and PCBA buyers can evaluate landed costs, MOQ, reel packaging, BOM...
Read article
I2C Pull-Up Resistors: Fix 100 kHz and 400 kHz Errors
Calculate I2C pull-up limits, understand why 4.7 kOhm may fail at 400 kHz, and diagnose parallel module pull-ups, slow edges and voltage-domain mistakes.
Read article
LM358 Alternatives: Dual Op-Amp Cross-Reference
The dual op-amp in a million low-cost designs: why its input range is wider than its output range, and what breaks when you swap it.
Read article
AMS1117 Thermal Budget: Junction Temperature at 5 V and 12 V
The AMS1117 is rated 1 A, but at 12 V input the thermal limit arrives near 0.19 A. Here is the arithmetic, the derating curves, and...
Read article
Week 44 Category Watch: LDO Takes the Top Spot
Week 44 brought a broad cool-off: LDO overtook 32-bit MCU as the top category, while global spot inventory kept building to 7.32 billion units.
Read article