ULN2003A Relay Driver: Drop, Flyback, and Thermal Budget
Seven Darlington pairs share one thermal budget. Saturation voltage, coil voltage, the COM pin, and how many channels can run at once.
Read articleTMC246B-PA-T is a motor driver from Trinamic.
| Manufacturer | Trinamic |
|---|---|
| Manufacturer Part Number | TMC246B-PA-T |
| Product Type | Motor Driver |
| Package | TQFP-44 |
| Manufacturer Package Code | PA |
Request a Quote for current pricing, order quantity, packaging, date code and delivery. Supplier availability will be confirmed with your quotation.
Technical Documents
Datasheet
Download PDFMANUFACTURER ACCESS
Manufacturers We Source
Browse frequently requested semiconductor and electronic component manufacturers, then search the catalog or submit an RFQ for the exact part you need.
From the desk
Recent Articles
Market signals, technical notes, and practical sourcing guidance for semiconductor procurement.
W25Q32 SPI Layout: Decoupling, Trace Length, Read Failures
Why a W25Q32 works at 1 MHz and fails at 50: capacitor distance, 40 mm of SCK at 1 ns edges, and the floating /HOLD pin...
Read article
USBLC6 ESD Layout: Clamp Path, Ground Stitching, Stubs
A TVS clamps at 31 V, but 10 mm of trace adds 240 V. Placement and return path, not the part number, decide whether the IC...
Read article
2N7002 Gate Drive at 3.3 V: Threshold Spread and RDS(on)
The 2N7002 is called logic-level, but at 3.3 V it is a 20 mA switch: threshold spread eats the margin and RDS(on) roughly doubles. Here is...
Read article
CH340 USB-UART Guide: Pinout, Clocks and Logic Levels
Compare CH340G and CH340C, wire V3 correctly, check UART voltage compatibility and separate USB enumeration faults from serial framing problems.
Read article
TVS and ESD Diode Selection: Standoff, Clamp, Speed
How to pick a TVS or ESD diode: match standoff to the rail, clamp to the pin absolute maximum, and capacitance to the interface speed.
Read article
SN74HC74 Guide: Pinout, Truth Table and Alternatives
Check SN74HC74 pinout, asynchronous preset and clear, guaranteed clock timing and HC/HCT input levels before qualifying a substitute or changing the footprint.
Read article
MAX485 RS-485 Guide: Pinout, Termination and Biasing
A practical MAX485 selection guide covering SOIC/DIP pinout, MCU logic levels, common-mode limits, termination, idle-bus biasing and half-duplex direction control.
Read article