Buck Converter Layout: Hot Loop, Switch Node, Copper
The schematic sets efficiency; the layout sets temperature. Hot loop, input capacitor ripple, switch-node ringing, thermal vias, and the loss budget that decides the copper.
Read articleManufacturer catalog
Review searchable product records associated with recom power, then confirm the exact MPN, sourcing path and commercial conditions through quotation. Manufacturer naming is a catalog field and does not state an authorized distribution relationship.
20001437 - RECOM Power, DIP-6
RAC03-05SK/SMT-R - RECOM Power, Non-IC
RAC03-12SK/SMT-R - RECOM Power
RAC03-15SK/SMT-R - RECOM Power
RACM06E-12SK/277 - RECOM Power
RACM06E-15SK/277 - RECOM Power
RACM06E-24SK/277 - RECOM Power
RACM16E-24SK/277 - RECOM Power
RVP003S-FBN-R - RECOM Power Power Management IC, SMD
RVP005-FBN-R - RECOM Power Power Management IC, SMD
RVP6501-PPN-R - RECOM Power Power Management IC, SMD
RVPW011-FJ1-R - RECOM Power DC-DC Converter, SMD
RVPW012-FJ2-R - RECOM Power DC-DC Converter, SMD
RVPW014-FJ1-R - RECOM Power DC-DC Converter, SMD
RVPW015-FJ2-R - RECOM Power DC-DC Converter, SMD
RVPW016-FJH-R - RECOM Power DC-DC Converter, SMD
RVSW013-FJ-R - RECOM Power Power Management IC, SMD
Supply boundary
Product records help identify a manufacturer part number and technical family. A listed part may be fulfilled from Chip-seek warehouse-held stock or a reviewed sourcing channel. Source, quantity, packaging, date code, MOQ, price and lead time are confirmed before an order is accepted.
From the desk
Market signals, technical notes, and practical sourcing guidance for semiconductor procurement.
The schematic sets efficiency; the layout sets temperature. Hot loop, input capacitor ripple, switch-node ringing, thermal vias, and the loss budget that decides the copper.
Read article
A partial reel is cheaper per piece and riskier per failure. Tape anatomy, count tolerance, moisture history, and the five clauses that prevent most surprises.
Read article
Work out whether a 7805 can power your board: check its pins, input headroom, realistic heat budget and the changes required for a buck replacement.
Read article
A receiving routine that holds up in an audit: ISO 2859-1 sampling, AQL by part class, cheap-to-expensive test order, and records someone else can reproduce.
Read article
At 480 Mb/s a bit is 2.08 ns. 90 ohm impedance, 50 mil skew, and a continuous return path decide whether the link keeps high speed...
Read article
Choose LM317 resistor values, identify the output-connected tab, check minimum load and calculate a realistic heat budget before approving a replacement.
Read article
An oscillator that starts on the bench and fails cold has a margin problem. Load capacitor math, the negative-resistance test, and the probe that stops the...
Read article
Most I2C failures are rise time and capacitance, not protocol. The 30-70% measurement, the pull-up window, and the probe that changes the answer.
Read article